Table of Contents
Advertisement
1.5
Transportation, Packaging, Storage
HBS delivers products in a specific transport package.
Save the undamaged packing. Ship and transport the device only in its original
packing.
Right before delivery, the welding head is once again checked for proper functioning and
a control mark is attached. When receiving the delivery, check everything for damages
and completeness. If damages occurred during transportation or components are
missing, inform the manufacturer or the haulier immediately (see page ii).
Proper functioning of the welding head can only be checked before starting-up by visual
inspection (visible damage).
The following items are to be observed if the welding head is not to be put into operation
immediately after delivery.
– The welding head must be stored in a secure place
– The welding head must be protected against humidity, dust, metallic dirt.
– Storage temperature: -5 °C to +50 °C
– Relative humidity:
If you resell the welding head, please provide us with the name and postal
address of the new owner so that we can advise them of any changes to the
operating manual.
1.6
Accompanying Documents
In addition to this operating manual, you must observe the operating manual of the power
unit as well as applicable accident prevention and safety instructions.
KAH 412 LA Order No. BA 94-37-412 Issue 23.10.08
0% to 50% at +40 °C
0% to 90% at +20 °C
13
Advertisement
Table of Contents
