How To Use "Baby Food - Cuckoo CR-10 Series Operating Instructions Manual

How to Use and Preset BABY FOOD
Press the "SELECTION" button to select BABY FOOD.
1
▶ When BABY FOOD is selected, the display shows 10 minutes.
2 Press the "SELECTION" buttons to set the desired time.
The right arrow button
1.
increases the cooking
time for BABY FOOD
in increments of 5
minutes.
3 Press the "COOK / TURBO" button to start the BABY
FOOD menu.
▶ Once the BABY FOOD mode starts, the cooking status and the
remaining time is displayed.
4 How to preset the BABY FOOD menu.
1. Press the PRESET button.
3. Select your desired cooking
time and press the SET
button.
BABY FOOD RECIPES
Food Menu
Sweet
Potato &
Apple
Porridge
BABY
FOOD
Soft rice
with tuna
and
vegetable

HOW TO USE "BABY FOOD"

The left arrow button
2.
decreases the cooking
time for BABY FOOD in
increments of 5
minutes.
4.Set the time to complete
cooking by pressing the
SELECTION button.
Ingredient
1. Peel the skins of apple and sweet potato and cut them into thin slices.
Sweet
2. Plcae the recipe no.1 and with 1/4cup of water in the inner pot
potato 70g,
3. After locking the cover and choosing [BABY FOOD] in the SELECTION
apple 70g,
BUTTON push [COOK/TURBO] button after setting up the time of
water 1cup and
universal steam for 45 minutes.
some honey
4. After cooking is completed, mash up it with a rice paddle and mix it
with some honey.
1. Pour out oil from tuna, tear it up into little pieces with chopsticks.
50g of rice,
2. Finely chop bell pepper and carrot.
30g of tuna(can),
3. Mix rice, tuna, bell pepper, and carrot.
10g of bell pepper,
4. Spread butter on the bottom of inner pot, put ingredients of 3. and
10g of carrot,
pour water.
1/2 cup of water, 5. Lock the lid, select [BABY FOOD] menu by pressing the SELECTION
BUTTON set multipurpose steam time 15minutes, and press the
butter,
[COOK/TURBO] button.
little bit of laver owder
6. Mix it well with a spatula after multipurpose steam is completed.
The cooking time for BABY
3.
FOOD can be set from 10 to
50 minutes.
2. Select your desired menu and press the SET
button.
5. Press the Preset or
COOK/TURBO button.
Procedure
29