How To Use "Baby Food - Cuckoo CR-0675F Series User Manual

how to use Baby food and timer
1
Press the "MENU/SELECT" button to select Baby Food.
▶ When Baby Food is selected, the display shows '10 minutes'.
2
Press the "TIME/SETTING" button to set the desired time.
1. If you press the "TIME/SETTING"button,
the time increases by 5 minutes.
3
Press the "START/QUICK" button to start the Baby Food menu.
▶ Once the Baby Food menu starts, the cooking status and the remaining
time are displayed.
4
How to set timer for Baby Food menu.
1. Press the
"MENU/SELECT"
button to select the
Baby Food menu.
Press the
"TIME/SETTING"
button to set the
Baby Food time.
how to Cook Baby food
Food Menu Preparations
Sweet
Potato Sweet potato 70g,
& Apple apple 70g, water 1 cup
Porridge and some honey
Baby
Food
50g of rice, 30g of
Soft rice tuna(can), 10g of bell
with tuna pepper, 10g of carrot,
and 1/2 cup of water,
vegetable butter, little bit of laver
owder

HOW TO USE "BABY FOOD"

2. Press the 3. Set the timer by
"TIMER/LOCK"
button.
1. Peel the skins of apple and sweet potato and cut them into thin slices.
2. Place ingredients of 1 with 1/4 cup of water in the inner pot.
3. After locking the cover and choosing [Baby Food] in the MENU/SELECT button,
push [START/QUICK] button after setting up the time of multipurpose steam for 45
minutes.
4. After cooking is completed, mash up it with a rice paddle and mix it with some honey.
1. Pour out oil from tuna, tear it up into little pieces with chopsticks.
2. Finely chop bell pepper and carrot.
3. Mix rice, tuna, bell pepper, and carrot.
4. Spread butter on the bottom of inner pot, put ingredients of 3. and pour water.
5. Lock the lid, select [Baby Food] menu by pressing the MENU/SELECT button,
set multipurpose steam time 15 minutes, and press the [START/QUICK] button.
6. Mix it well with a spatula after multipurpose steam is completed.
2. The Baby Food time can be configured
from 10 to 50 minutes.
4. Press the
"TIMER/LOCK"
pressing the
button or the
"TIME/SETTING"
"START/QUICK"
button.
button.
▶ After setting the timer,
if you do not press any
button for 7 seconds,
the timer starts.
Procedure
19 19