Specification - HOGERT HT1E603 User Manual

Pressing the button, the maximum and minimum values obtained during the test are displayed. The maximum and minimum values
are reset when the test function is changed or the meter is switched off.
6) Relative
The instrument displays relative measurement results in all functions except the Hz frequency.
7] Hz% Frequency
During the Hz% measurement, pressing this button will switch the meter between the HZ function and the work cycle function.
8) Function selection knob
With this switch you can select the needed function and range.
9) Socket „A"
For red (positive) lead (200mA ~ 10A).
10) COM socket
for the black (negative) lead.
11) INPUT socket
Plug-in connector of the red lead for all measurements except for current measurements (≥200mA).

5. SPECIFICATION

5-1. DC voltage (Auto ranging)
Range Resolution
400mV 0.1mV
4V 1mV
40V 10mV
400V 100mV
600V 1V
Input impedance: 10 MΩ
Overload protection: 600 V DC or 600 AC RMS
(Range 200 mV: 250 V DC / AC RMS)
Max. Input voltage: 600 V
5-2. AC voltage (Auto ranging)
Range Resolution
400 mV 1 mV
4 V 1 mV
40 V 10 mV
400 V 100 mV
600 V 1 V
Input impedance: 10 MΩ
Frequency range: 40 Hz ~ 400 Hz
Overload protection: 600 V DC or 600 AC RMS
Answer: Average, calibrated in rms sinusoidal wave
Max. Input voltage: 600 V AC RMS
5-3. TEMPERATURE
Range Resolution
-40 ~1370°C
-40 ~2000°F
NOTICE: Different temperature sensors are configured in different temperature test ranges, and standard temperature sensors
are designed for standard configuration
Adres producenta/ Adresse des Herstellers/ Manufacturer's Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
Accuracy
±(0.8% reading + 5 digits)
±(0.8% reading + 3 digits)
±(1.0% reading + 5 digits)
Accuracy
±(1.2% reading + 5 digits)
±(1.0% reading + 5 digits)
±(1.2% reading + 8 digits)
Accuracy
-40°C~150°C:±(2.5% + 4) about
1°C
150°C~1370°C:±(2.5% + 4)
-40°F~302°F:±(2.5% + 4) about
1°F
302°F~2000°F:±(2.5% + 4)
9