Electrical Symbols; Device Description - HOGERT HT1E603 User Manual

ELECTRICAL SYMBOLS

Direct Current DC
Alternating Current AC
Direct or alternating
current DC/AC
Important information.
Read the instructions.
High voltage danger.
Ground
Low battery
Fuse
Diode
H
Data hold

4. DEVICE DESCRIPTION

8
Continuity test
˚C
Celsius scale
˚F
Fahrenheit scale
AUTO
Automatic range
Compliance with
the European Union
Directive.
Double insulation
APO
Auto Power Off
Battery charge indicator
Relative test
1) 3.75" LCD screen
2) RANGE
By default, the meter operates in automatic range mode when measuring
voltage, current, resistance or capacity. When the meter is in automatic
range mode, „AUTO" is displayed.
To enter and exit manual range mode:
a. Press the „RANGE" button, the meter goes into manual range
mode and the „AUTO" symbol goes out.
b. To exit manual mode, press and hold the „RANGE" button for
2 seconds, the meter will return to automatic range mode and
„AUTO" will be displayed.
3) "SELECT (choose
During current measurement, pressing this button will switch the meter
between the DC and AC functions.
When measuring a diode or continuity, pressing this button will switch the
meter between the diode and continuity functions
4) „HOLD / " (stop)
After pressing the button, the current reading is stopped on the display,
and displays „HOLD /
H
and the „ " will disappear. Pressing the button longer than 2 seconds,
switches the backlight on, pressing the button again longer than 2 se-
conds, switches the backlight off
5) "Max/Min"
Adres producenta/ Adresse des Herstellers/ Manufacturer's Address/ Адрес производителя
". To exit the pause mode, press the button again
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków