Step - Cisco o UCS X440p Installation And Service Manual

Recycling the Riser B PCBA
See Removing a HHHL GPU, on page

Step 4

Using a #1 Phillips screwdriver, remove the six pan-head screws from the riser cage interior side wall (the side opposite
the door).
Step 5
Detach the PCB from the sheetmetal and dispose of the PCB, any components, and sheetmetal in compliance with relevant
e-waste and recycling laws.
Cisco UCS X440p PCIe Node Installation and Service Guide
48
32.
Servicing the Cisco UCS X440p PCIe Node