Table of Contents
Advertisement
Recycling the Motherboard PCBA
Blue circle (
Red Circles (
Step 6
Using a T8 Torx screwdriver, remove the two M3 flat-head screws (one per side) from the PCIe node side walls.
Step 7
Remove the bottom screws.
a) Turn the PCIe node over so that the bottom sheetmetal is facing up.
b) Using an H2.0 hex-head screwdriver, remove the low-profile socket-head screw.
c) Using a T10 Torx driver, remove the pan-head screw.
Cisco UCS X440p PCIe Node Installation and Service Guide
44
)
)
Servicing the Cisco UCS X440p PCIe Node
One pan-head M3x0.50x7mm Torx screw
Six pan-head M3x0.50x20mm Torx screw
Advertisement
Table of Contents
