Clearing Jams - Lexmark X422 Quick Reference Manual

Clearing jams

For more information on clearing jams, see the User's Reference located on the
Publications CD.
Jams under the print cartridge or in the fuser
(200 or 201 Paper Jam, remove toner cartridge to
access)
1 Open the upper front door using the finger grips.
Finger grips
2 Remove the print cartridge.
CAUTION!
The rear portion of the inside of the MFP may be hot.
Warning!
Do not touch the photoconductor drum on the bottom of the
print cartridge.
3
Remove any jams. If paper is in fuser, pull carefully to avoid tearing..
4
Reinstall the print cartridge.
5 Close the upper front door.
6
Press .
Jams behind the rear output bin door (202 Paper
Jam, open rear door to access)
1 Open the rear output bin door.
2
Remove any jams. You may have to remove the print cartridge to clear a jam
in this area. If paper is in fuser, pull carefully to avoid tearing.
3 Close the rear output bin door.
4
Press .
Jams in a tray
1 Gently open the tray until you can see the jam.
2
Remove any jams.
If you see any print media above the metal stop, completely remove the tray.
Press down on the print media to lock the metal plate below it into place.
Reposition the print media under the metal stop.
3 Reinstall the tray.
4 Press
.
Jams under the MFP (230 Paper Jam, check duplex)
Print media can jam under the MFP and above tray 1 when the duplex function is in
use. To clear this type of jam:
Note:
Jams under the MFP may not always be visible.
1 Completely remove tray 1.
2 Press down the green lever on the left under the MFP.
3 Remove any jams.
4 Grasp the tab on the rear door and pull the door open.
5 Press down the green lever on the right under the MFP.
6 Remove any jams.
7 Close the rear door, and then reinstall the tray.
8 Press .
Jams in the scanner (290–293 Scanner jams)
To open the Automatic Document Feeder (ADF), push and hold the release button
on the left front side of the ADF and lift up. Remove jam.