Page 1
Please scan the QR code to access the manual in multiple languages. IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B...
Page 2
WARNING 1. Please make sure to turn off the power before starting the installation. 2. Installation must be performed by a qualified electrician. 3. Proper grounding should be ensured throughout the installation. This marking indicates that this Caution, risk of product should not be disposed electric shock.
4. The mounting surface should be perpendicular to the horizontal line as shown in the figure below. Please install the inverter vertically or tilted back ≤15° to facilitate the heat dissipation of the machine. Do not tilt the inverter forward, horizontally, upside down, lean back too much, or install it sideways.
5. After lifting the inverter, fasten the 4. Take out the inverter from the packaging box. If the installation position is high, back bracket plate of the inverter into the wall hanging plate, and ensure that transport the inverter to the destination the inverter bracket plate is well while ensuring safety.
Page 5
PV Wiring 1. Connect the outgoing cable of the PV panel to the MC4 terminal delivered with the inverter 2. Check the polarity of the PV strings, and then connect it to the inverter. Communication connection 1. 485 pin definition 1 (RED) 5VDC 2 (ORANGE)