Typical Pin Depth Values; U9391C/F/G Pin Depth Characteristics - Keysight U9391C Operating And Service Manual

Typical pin depth values

The pin depth value of each device is not specified, but is an important
mechanical parameter.
The electrical performance of the device depends, to some extent, on its pin
depth.
The electrical specifications for each module takes into account the effect of pin
depth on the device's performance.
The following tables list the typical pin depths for the devices.
Table 3-4
Port
In port
Out port
Trigger port
If the pin depth of a device does not measure within the observed pin depth limits,
it may be an indication that the device fails to meet electrical specifications.
Keysight U9391C/F/G Operating and Service Manual

U9391C/F/G pin depth characteristics

U9391C
0 to –50.8
(0 to –20.0)
0 to –50.8
(0 to –20.0)
0 to –127.0
(0 to –50.0)
Typical pin depth in micrometers
-4
(10 inches)
U9391F
0 to –50.8
(0 to –20.0)
0 to –50.8
(0 to –20.0)
0 to –127.0
(0 to –50.0)
Specifications 3
U9391G
0 to –50.8
(0 to –20.0)
0 to –50.8
(0 to –20.0)
0 to –127.0
(0 to –50.0)
33