Set User-Definable Text; Gas Level Display On / Off - Dräger REGARD Instructions For Use Manual

REGARD 8-Input 4-20 Module & 8-Channel Display Card (ATEX Version)

Set user-definable text

User-definable text can be used to enter non-standard gas name or measurement unit.
Text entered is used when USER setting is chosen in command 04–0 or 04–1.
• Select command 52–4
Waiting for text entry: first character flashing
• Enter text. e.g. mg/l
(Press  or
• Select next / previous head
• Confirm selection and exit command

Gas level display on / off

Normal display of gas level can be disabled for any head, if required.
• Select command 60–1
• Select ON for normal display, or OFF to disable
display of gas level
• Confirm selection and exit command
Issue 2. October 2011
to select next or previous character)
PRESS DISPLAY
R USER
????
R mg/l

52–4:h2
R 52–4
PRESS DISPLAY
R DISPLAY
h1:ON
R 60–1:h1
31