Advertisement
Quick Links
Product Installation Guidelines
®
CliniLever
PRODUCT CODES:
- TCWMC80CC
- TCWMC80HC
- TCWMJ80CC
- TCWMJ80HC
SPECIFICATIONS
− Contra-rotating handles for easy use
− Smooth round design to facilitate easy cleaning and help reduce dirt and bacterial growth
− Chrome plated finish for easy cleaning and added durability
− The main body is made of solid dezincification resistant (DR) brass rod, with a DR brass fixed outlet.
Quick action SBA's includes brass jumper valve / ceramic cartridge component, with red and blue indicator
−
button on 80mm lever action handles.
IMPORTANT: All CliniLever
leave our premises in good working order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without
notice.
TOOLS REQUIRED
−
Spanner
−
Hex key
−
Thread tape
© Galvin Engineering Pty Ltd
CP-BS Hospital Washing Machine Tap
®
healthcare taps are tested in accordance with AS/NZS 3718 and
TCWMJ80CC / TCWMJ80HC
TCWMC80CC / TCWMC80HC
Version 1, 4 November 2022, Page 1 of 4
½" BSP - Female
¾" BSP - Male
Jumper Valve
Ceramic Disc
Min
50
Max
500
Min
5
Max
65
N/A
Chrome
Document No.: 001.00.10.17
Advertisement
Related Manuals for Galvin Engineering CliniLever TCWMC80CC
Summary of Contents for Galvin Engineering CliniLever TCWMC80CC
- Page 1 Working Pressure Range (kPa) Working Temperature Range (°C) Nominal Flow Rate (LPM) Finish Chrome NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice. TOOLS REQUIRED − Spanner − Hex key − Thread tape © Galvin Engineering Pty Ltd...
- Page 2 Check lever handles for correct operation. equivalent to ensure the connection does not − Secure the handle in position using the leak. supplied washer and stainless steel cap − DO NOT tighten the body by using the top screw. assembly. © Galvin Engineering Pty Ltd...
- Page 3 Build up of scale on spindle, spindle regrease. Replace o-ring. (jumper valve) worn or o-ring has been damaged Complete SBA may need to be replaced. Handle is loose Screw has come loose Tighten handle screw © Galvin Engineering Pty Ltd...
- Page 4 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.