NCR OPTIC 5 Installation Instructions Manual page 77

Installation Instructions for Encore
All cable assemblies connected to OPT Unit after being fastened to Anchor Point
5. Install the OPTIC 5 Hatch Cover (497-0517179).
a. Place OPTIC 5 Hatch Cover in place over the OPTIC 5 and avoid pinching any
cables connected to the OPTIC 5 or Dispenser door.
Note: The grounding cable connector for the hatch cover should be on the side
closest to the dispenser door hinge as indicated.
b. Install the cover to the modular door using 8 captive Phillips head screws.
63