NCR OPTIC 5 Installation Instructions Manual page 67
For encore 500s non ecim 6001-0011-8801
Hide thumbs
Also See for OPTIC 5:
- Retrofit installation manual (116 pages) ,
- Installation instructions manual (80 pages) ,
- Installation instructions manual (20 pages)
Table of Contents
Advertisement
Installation Instructions for Encore
2. follow the correct wiring steps for the corresponding power distributor assembly.
A. Power Control Module
1. Install the Y cable (497-0514570) to the Encore adapter cable that was previously
installed.
a. Cut off the far female end of the Y cable as close to the connector as possible.
53
Advertisement
Table of Contents
