Tools Required - NCR OPTIC 5 Installation Instructions Manual

Tools Required

3
Tools Required
The following tools are required to mount the OPTIC 5 Door Upgrade onto a GVR
Encore fuel dispenser:
• Safety Glasses
• GCBO Key
• GVR 751 Key
• Medium Flathead Screwdriver
• #6 (or small) and medium Phillips Screwdriver
• Socket Wrench and Assorted Hex Sockets or Nut Drivers
• 1/4" and 7/16" (Could vary by pump)s
• Wire Stripper and Cutter
• Needle-Nosed Pliers
• UL Listed Crimp-on Fork Connectors/Terminals
• Small Wire/Zip-tie Clippers
Warning: Do NOT use power tools if working on a fuel station forecourt. Any spark
could cause an explosion.