Solving Fax Problems; Solving Paper Feed Problems - Lexmark 4600 MFP User Manual

Solving fax problems

Note: Faxing is not supported on all models.
The following solutions will help solve fax quality problems or solve fax problems. For additional information, see Fax tips.
Symptom
The fax document takes a long
time to transmit.
The images on the fax I sent are
not clear.
Caller ID is not shown

Solving paper feed problems

Symptom
The Paper Jam
message remains after
you remove the jammed
paper.
Original documents
misfeed in the ADF.
Multiple pages feed into
the ADF.
Troubleshooting
Solution
Touch Options, then under Content, change the setting to Text, and then set the
resolution to Standard.
Touch Options, then under Content, change the setting to Text/Photo or Photo.
Increase the output resolution.
Note: This will increase the amount of time required for the scan and will increase the
quality of the fax output.
If your region supports caller ID, you may have to change the default setting. There
are two settings available, FSK (pattern 1) and DTMF (pattern 2). Contact your
telecommunications company to determine which pattern or switch setting to use.
Cause
You have not pressed Continue
or have not cleared the entire
paper path.
The guides are not adjusted
properly.
The pick pad may be worn.
The pick pad may be worn.
The pick roller may be worn.
Solving fax problems
Solution
Clear the entire paper path, and then press Continue.
See Clearing jams for more information.
Adjust the guides toward the media until they lightly rest
against the edge of the media.
Replace the pick pad.
See Ordering an ADF pick roller for more information.
Replace the pick pad.
See Ordering an ADF pick pad for more information.
Replace the pick roller.
See Ordering an ADF pick roller for more information.
111