Printing The Menu Settings Page; Printing A Network Setup Page; Printing A Font Sample List; Printing A Directory List - Lexmark 4600 MFP User Manual

Printing the menu settings page

You can print a menu settings page to review the default MFP settings and to verify the MFP options are installed correctly.
1
Make sure the MFP is on and the Ready message appears.
2
Touch the menu button on the control panel.
3
Touch Reports.
4
Touch Menu Settings Page.

Printing a network setup page

You can print a network setup page to review the default MFP settings and to verify the MFP options are installed correctly.
1
Make sure the MFP is on and the Ready message appears.
2
Touch the menu button on the control panel.
3
Touch Reports.
4
Touch Network Setup Page.

Printing a font sample list

To print samples of the fonts currently available for the MFP:
1
Make sure the MFP is on and the Ready message appears.
2
Touch the menu button on the control panel.
3
Touch Reports.
4
Touch the down arrow until Print Fonts appears, then touch Print Fonts.
5
Touch PCL Fonts or PostScript Fonts.

Printing a directory list

A directory listing shows the resources stored in flash memory or on the hard disk. To print a listing:
1
Make sure the MFP is on and the Ready message appears.
2
Touch the menu button on the control panel.
3
Touch Reports.
4
Touch the down arrow until Print Directory appears, then touch Print Directory.
Printing
Printing the menu settings page
51