Calibration - Lexicon CP-3 Plus Owner's Manual

Calibration

Calibration
LCD Adjustment
18
When turning on the CP-3
routine described in Chapter 4 of this manual.
Depending on the location of the CP-3
adjust the front panel Liquid Crystal Display (LCD) for optimum viewing.
To adjust this display, press the SETUP key on the Expanded Remote. The
CP-3 PLUS is now in SETUP mode. Within this mode, operations are carried
out using the three PARAM buttons and STORE.
The LCD will now read:
Press PARAM to step to the DISPLAY ADJUST menu, then press PARAM
. The LCD will now read:
D I S P L A Y M E N U
> O S D P O S I T I O N
Pressing PARAM twice will step to the following display:
D I S P L A Y M E N U
> L C D C O N T R A S T
Pressing PARAM or
L C D C O N T R A S T
Press PARAM or until the contrast of the display is at a maximum as
seen from your listening chair.
Press SETUP to return to the main menu.
PLUS for the first time, perform the Restore Defaults
PLUS in your room, you may need to
S E T U P M E N U
> I N P U T S
will display:
Lexicon