Download Print this page
KVM-TEC masterEASY Quick Instructions

KVM-TEC masterEASY Quick Instructions

Extender over ip
Hide thumbs Also See for masterEASY:

Advertisement

Quick Links

kvm-tec
First Aid
masterEASY
No Power
USB is not
(No LED)
working
Are the USB
Check the
Devices plugged
powerplug
in correctly?
Is the USB cable
Is the power
on the Local side
supply ok? Try
plugged into the
another Unit.
PC?
Are the USB
Devices working
Contact kvm-tec
directly on the
support
PC?
Replace the USB
cable from PC to
the Local
Extender
Check if local
and remote Unit
have the same
fi rmware
Check if the local
or the remote
Unit is causing
the problem by
swaping fi rst the
local and than the
remote Unit to
another Unit
Contact kvm-tec
support
your questions about installation?
Misprints, errors and technical changes reserved
No Video
Video error
(stripes in the
picture)
Check if all
Check if all
cables are plug-
cables are plug-
ged in correctly
ged in correctly
Check if the PC is
Check if the PC is
sending a Image
sending a Image by
by plugging in a
plugging in a
monitor on the
monitor on the
local out of the
local out of the
local Unit
local Unit
Check if the DDC
Check if the DDC is
is set correctly (in
set correctly (in menu
the menu under
under point „O")
point „o")
Check if local and re-
Check if both
mote Unit have the
Units have the
correct fi rmware
correct fi rmware
Check if the
Contact kvm-tec
network switch
support
is setup correctly
and has enough
bandwidth
Check if other units
have the same
behaviour
Contact kvm-tec
support
We are here for you to answer
Manual download www.kvm-tec.com
or
kvm-tec Installationchannel on our homepage
personally +43 2253 81912
Check out
our Installation Channel:
FULL HD - KVM EXTENDER OVER IP
Tune in the easy KVM World
Tune in the easy KVM World
Tune in the easy KVM World
masterEASY
Single in copper
Art Nr KT - 8112
www.kvm-tec.com
Quick
Instructions
Instructions
V102022
master
Easy

Advertisement

loading
Need help?

Need help?

Do you have a question about the masterEASY and is the answer not in the manual?

Questions and answers

Summary of Contents for KVM-TEC masterEASY

  • Page 1 Unit to behaviour another Unit V102022 Contact kvm-tec Contact kvm-tec support support We are here for you to answer your questions about installation? Manual download www.kvm-tec.com kvm-tec Installationchannel on our homepage personally +43 2253 81912 Misprints, errors and technical changes reserved...
  • Page 2 If you are using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP snooping (Switch Layer 3) HAVE FUN - your kvm-tec Extender is now in use for many years (MTBF approx 10 years) Misprints, errors and technical changes reserved...
  • Page 3 DISPLAYING THE FIRMWARE VERSION ACCESS TO MAIN MENU Use the monitor and the keyboard to access the main menu Make sure that the main menu is open. Under „A“ - About the currently installed firmware version of the remote (CON) and local (CPU) extender is displayed. Access to the main menu.
  • Page 4 Video and USB show if data is currently being transferred Video and USB show if data is currently being transferred Single Single IHSE China Co.,Ltd KVM-TEC KVM-TEC ASIA IHSE GmbH IHSE USA LLC IHSE GMBH Asia p +9173573 20204 Room 814 Gewerbepark Benzstr.1...

This manual is also suitable for:

8112