Making Batch File - BOPIXEL OPR305 Series Operating Manual

After user press "set" button, the new number will written into module, then
press "get" button will get the new number.

4.7 making batch file

Batch file is used for storage custom configurations into flash, so user could not
set the same configurations every time after powering up the module.
The way to make batch file will be show below, the batch file users make can not
be used directly, please contact Bopixel's engineer to help you finish the batch file, so
you can compile it into your firmware.
① Connect OPR305 series module to PC with USB type C cable, and power up
the module. And press advanced button, to start the advanced mode.
17