4.5 software Operating instructions
OPR305 series module are made for high speed structure light projection, in this
case, the patterns will preinstalled into flash onboard, and operating in "internal
patterns" mode.
4.5.1 pattern sets set up
Patterns sets are set up for putting several similar patterns into one place, and
then they could use one parameter setting.
The max patterns number can be placed in one pattern set is listing below:
1D Pattern Type
8-bits vertical patterns
8-bits horizontal patterns
1-bits vertical patterns
1-bits horizontal patterns
Click "light control" tab
Click "internal patterns"
On the the Pattern Sets page, user can add or delete pattern sets and add or delete
patterns to and from each pattern set. Apreview window on the right shows the pattern
selected. Click Next on the bottom-right or any of the tab (Pattern Order or Pattern
Control) on the left to continue.
Max # of Patterns
10
6
8
51
64