四、Operating Manual
4.1 Product Manual
This DLP projector is mainly for structured light application scenarios. It can
project 2D checkerboard test patterns and 1D 1bit or 8bit structured light patterns. The
functions of ordinary projectors have been simplified and cannot be used.
Note: Since this DLP projector has been deleted compared to the TI official
module, all official GUI functions cannot be used. In addition, TI official firmware is
not suitable for this module, please use the firmware provided by our company.
For specific usage, please refer to TI's official user manual
4500 Evaluation Module User's Guide (Rev. F)
For more application manuals, please refer to 《
TI.com.cn
》
4.2 Software and Documentation
4.2.1 Software
Controlling Software GUI:DLPLCR4500EVM Evaluation board | TI.com
Please use the basic firmware provided by our company for the firmware.
4.2.2 Software Installation
(1) Unzip the installation control interface
DLPLCR4500GUI-3.0.0-windows-installer.zip , and install the corresponding
program.
(2)Unzip and install the firmware DLPR350PROM-3.0.0-windows-installer.zip, and
install the corresponding firmware program.
》。
DLPLCR4500EVM 评 估 板 |
8
《DLP® LightCrafter™