Subscribe to Our Youtube Channel
Related Manuals for Electrolux Professional WB5130H
Summary of Contents for Electrolux Professional WB5130H
- Page 1 User manual Washer extractor WB5130H, WB5180H Type W3... 438 9097-60/EN Original instructions 2022.08.24...
-
Page 3: Table Of Contents
Contents Contents 1 Safety Precautions ..........................5 General safety information......................6 Commercial use only........................6 Symbols............................6 2 Warranty terms and exclusions......................7 3 Program description ..........................8 General.............................8 Program description ........................8 4 Handling .............................9 Load ............................9 Detergent ..........................10 How to start the machine ......................11 Additional functions........................12 When program has ended ......................13 5 Timer..............................14... -
Page 5: Safety Precautions
• The openings in the base, shall not be obstructed by a carpet. • Maximum mass of dry cloth: WB5130H: 14 kg, WB5180H: 20 kg. • A-weighted emission sound pressure level at working stations: –... -
Page 6: General Safety Information
User manual and breakfast type environments, areas for communal use in blocks of flats or in launderettes. 1.1 General safety information The machine is only intended for water-wash use. Do not hose down the machine with water. In order to prevent damage to the electronics (and other parts) that may occur as the result of condensation, the ma- chine should be placed in room temperature for 24 hours before being used for the first time. -
Page 7: Warranty Terms And Exclusions
Warranty will be applicable where the customer has used only genuine spare parts and has performed maintenance in accordance with Electrolux Professional user and maintenance documentation made available in paper or elec- tronic format. Electrolux Professional strongly recommends using Electrolux Professional approved cleaning, rinse and descaling agents to obtain optimal results and maintain product efficiency over time. -
Page 8: Program Description
User manual 3 Program description 3.1 General The machine is equipped with a number of programs adapted to the range of use to which the machine is intended — different segments use different programs. The following program description is a short description of some exam- ples of programs that can be used. -
Page 9: Handling
User manual 4 Handling 4.1 Load Open the dirty side loading door. The dirty side loading door can only be opened if the clean side unloading door is closed and locked. Press the locking arm so that the inner drum can be rotated. Rotate the inner drum until the door in the inner drum is facing the opening of the dirty side loading door. -
Page 10: Detergent
Before the machine is started the locking mechanism for the inner doors MUST be tested: 1. Push the inner doors inwards WITHOUT pressing the safety latch. If the inner doors opens, the safety latch is not working; call your Electrolux Professional service repre- sentative. THE MACHINE MUST NOT BE USED. -
Page 11: How To Start The Machine
User manual Softener, liquid. Main wash for liquid detergent. Pre-wash, powder or liquid detergent, if option “pre-wash” has been selected. Main wash for powder detergent. 4.3 How to start the machine Select program by turning the control knob or select program with the quick selection buttons (if some of the buttons are programmed with this function). -
Page 12: Additional Functions
User manual 4.4 Additional functions There is a menu with additional functions available for selection after start. When pressing the control knob / start but- ton (on machines without control knob) the menu will appear on the display. Select from the menu by turning the control knob / pressing the temperature button/-s and press the control knob / start button to activate. -
Page 13: When Program Has Ended
User manual Auto restarts Select AUTO RESTARTS and activate. Set the number of automatic restarts that the machine will perform of the selected program. Press the control knob / start button to confirm the settings. 4.5 When program has ended When a program has finished, the indicating lamp on the clean side will show when the clean side unloading door can be opened. -
Page 14: Timer
User manual 5 Timer The timer is used to start a part of the program (for example the last rinse of the udder cloth program) after pause on a pre-set time. The time can be set for all days or for selected days. To program the timer you need to activate the machines service mode. -
Page 15: Error Codes
User manual 6 Error codes A fault in the program or in the machine is indicated by an error code on the display. Some of these error codes can be solved easily without contacting service personnel. Error Text Cause/Action code 11:1 NO WATER Water level acknowledgement not reached in time. -
Page 16: Water Inlet
User manual 7.6 Water inlet At regular basis, check the filter at the water inlet. Clean if necessary. Demount the hose to the water inlet and pull out the filter (A). When remounting, make sure the filter is in position and that the connections are tight. fig.7706 7.7 Maintenance to be carried out by qualified service personnel Contact qualified service personnel to perform the following maintenance:... -
Page 17: Disposal Information
User manual 8 Disposal information 8.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g. - Page 20 Electrolux Professional AB 341 80 Ljungby, Sweden www.electroluxprofessional.com...
Need help?
Do you have a question about the WB5130H and is the answer not in the manual?
Questions and answers