Table of Contents
Advertisement
CAUTION
Make sure that you earth the cables.
• Do not connect the earth wire to the gas pipe, water pipe,
lighting rod or telephone wire. If earthing is not complete,
electric shock or fire may occur.
Install the circuit breaker.
• If the circuit breaker is not installed, electric shock or fire may
occur.
Make sure that the condensed water dripping from the drain
hose runs out properly and safely.
Install the power cable and communication cable of the indoor
and outdoor unit at least 3.3 ft (1m) away from the electric
appliance.
Install the indoor unit away from lighting apparatus using the
ballast.
• If you use the wireless remote control, reception error may
occur due to the ballast of the lighting apparatus.
Installation Procedure
Step 1 Checking and preparing
accessories
The following accessories are supplied with the indoor unit. The
type and quantity may differ, depending on the specifications.
User's manual(1)
Insulation Install Outlet (1)
Bracket Hanger (1)
Wireless remote control (1)
Installation manual (1)
Insulation Install SVC (1)
Cable-tie (8)
Battery (2)
Do not install the air conditioner in following places.
• A location where there is mineral oil or arsenic acid. Resin,
flame, or accessories may drop or water may leak. The heat
exchanger capacity may decrease or the air conditioner may
be out of order.
• A place where corrosive gas such as sulphuric acid gas
generates from vent pipes or air outlets.
• The copper pipe or connection pipe may corrode and
refrigerant may leak.
• A place where machines may generate electromagnetic
waves. The air conditioner's control system may not operate
normally.
• The place where there is a danger of existing combustible
gas, carbon fibre or flammable dust.
• The place where thinner or gasoline is handled. Gas may leak
and it may cause fire.
Drain Hose (1)
Flare Nuts
AC015BNJDCH
Remote Control Holder (1)
M4x12 tapped screw(1)
Tube connector
AC015BNJDCH
Tapped Screws M4 x 16 (2)
5
English
Advertisement
Table of Contents
