Table of Contents
Advertisement
Installation Procedure
Setting the indoor unit option code with wired remote controller
In order to set the indoor unit option code use the wired remote controller and follow the directions below.
Main Menu
Sub-menu
Away/MDS
Press the
and
buttons at the same time for more than 3 seconds and then a Main menu will be displayed.
1. Press the
/
button to select
2. Press the
/
button to select
• The first digit represents the page number and the remaining five digits are option codes.
NOTE
• The option code which is currently setting will flicker.
3. Press the
/
button to set the option code in order. Press
4. Press the
button to save and complete the option setting.
5. Press the
button to exit to normal mode.
Press the
NOTE
DB68-11271A-02_IM_CAC Universal AHU Indoor_AA_EN_.indd 47
Data bit
1 2 3
4
5
6
and then press
and then press
button anytime during setup to exit without setting.
Page number
SEG1
SEG2
SEG3
0
Page number
SEG7
SEG8
SEG9
1
Page number
SEG13 SEG14 SEG15 SEG16
2
Page number
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3
Page number
button to enter a Sub-menu setting screen.
button to enter a Indoor unit option code setting screen.
button to go to the next page.
Option Code
1 2 34 56
SEG4
SEG5
SEG6
SEG10 SEG11
SEG12
SEG17 SEG18
English
47
2022-09-15 오전 9:53:31
Advertisement
Table of Contents
