Table of Contents
Advertisement
Installation Procedure
Step 3 Installing the unit
1 When you install the indoor with side-pipe connection, please
make space more than 11.81 inch (300mm) from the wall.
A
A : 11.81 inch(300 mm)
2 When you install the indoor with side-pipe connection, please
make space more than 11.81 inch (300mm) from the wall.
Position of drain
3 Please remove packaging materials when installing the unit.
(**009/012******: 6 Items / **015/018******: 7 Items)
8
English
A
Position of drain
4 The body front should be opened to connect pipes.
Remove the 4 screws on the front of the unit and then pull
the lower section of the unit out as shown below.
Screw Hole
5 Make a hole in the wall.
2.95(75)
Drain hose
2.95(75)
less than 2.76(70)
6 Refrigerant and drain pipes and cables should go through the
hole located at the on the back of the unit at the bottom.
Screw Hole)
Ø2.36~2.56(60~65)
Unit:inch(mm)
Advertisement
Table of Contents
