Samsung AC BNJDCH Series Installation Manual page 20

Installation Procedure
Take the steps presented in the following table:
1 Setting SEG2, SEG3 option
Press Low Fan button
Press High Fan button
Each time you press the button,
2 Setting Cool mode
Press Mode button to be changed to Cool mode in the ON status.
3 Setting SEG4, SEG5 option
Press Low Fan button
Press High Fan button
Each time you press the button,
4 Setting Dry mode
Press Mode button to be changed to Dry mode in the ON status.
5 Setting SEG6, SEG8 option
Press Low Fan button
Press High Fan button
Each time you press the button,
6 Setting Fan mode
Press Mode button to be changed to FAN mode in the ON status.
7 Setting SEG9, SEG10 option
Press Low Fan button
Press High Fan button
Each time you press the button,
8 Setting Heat mode
Press Mode button to be changed to Heat mode in the ON status.
20
English
Option setting
to enter SEG2 value.
to enter SEG3 value.
will be selected in rotation.
to enter SEG4 value.
to enter SEG5 value.
will be selected in rotation.
to enter SEG6 value.
to enter SEG8 value.
will be selected in rotation.
to enter SEG9 value.
to enter SEG10 value.
will be selected in rotation.
Status
SEG2 SEG3
SEG4 SEG5
SEG6 SEG8
SEG9 SEG10