Advertisement
Set the Volume of Soap Dispensed
- IMPORTANT! Four options are available to control the
amount of dispensed soap. The desired option is set by
toggling the volume switches to an up or down position.
- NOTE: The dispensor comes equipped with a 1600 ml
reservoir, and the soap counter is set to the 1600 ml
position.
- Lift the rubber cover to access the control switches.
- Set the position of the two volume switches for the
desired volume of soap dispensed. Refer to the
settings shown above.
- Verify that the soap counter switch is set to the correct
position for your reservoir size.
- Refer to the chart below for the number of dispenses
available based on the volume setting .
- Reinstall the rubber cover.
- Refer to the chart below for the approximate number of
dispenses available based on the volume setting .
Soap Volume
Setting
Dispensed
A
0.8 ml
B
1.2 ml
C
1.6 ml
D
2.0 ml
1434862-T01-D
Cover
盖子
A
0.8 ml
Soap Count
(1600 ml)
1800
1200
900
720
设置出液量
Volume
Switches
容量开关
Up
上
B
C
1.2 ml
1.6 ml
- 重要！
有四个选项可用于控制出液量。 可通过将容量开关切
换至上或下的位置来设置所需的选项。
- 注意：
皂液器配有1600ml的皂液盒， 皂液计数器设置在1600ml的
位置上。
- 提起橡胶盖以操作控制开关。
- 通过设置两个容量开关的位置来获得所需的出液量。 请参考上
文所示的设置。
- 确保已根据皂液盒的尺寸将皂液计数器开关设置到正确的位置。
-皂液盒可选出液次数设置， 请参阅下表。
- 重新安装橡胶盖。
- 皂液盒的大约出液次数设置， 请参阅下表。
设置
出液量
A
0.8 ml
B
1.2 ml
C
1.6 ml
D
2.0 ml
13
Soap
Counter
皂液计数器
1600 ml
Down
下
D(默认)
2.0 ml
出液次数
（1600ml）
1800
1200
900
720
Advertisement
