Rockwell Automation Allen-Bradley 6300B Installation Instructions Manual

Installation Instructions
Original Instructions
6300B Machine Mount Box PCs
Catalog Number 6300B-MM
Topic
Summary of Changes
Environment and Enclosure Information
UL/cUL Mark Compliance
European Union Directive and UKCA Compliance
Power Supply Connection
Installation Requirements
Approximate Dimensions
Tools and Hardware for Installation
Add Solid State Drives and PCI/PCIe Cards (optional)
Install the Machine Mount Box PC
Connect the Peripheral Cables
Install the Ground Wire (optional)
Additional Resources
ATTENTION: Read this document and the documents that are listed in the
Read and accept the End-User Setup procedure.
configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition to the
requirements of all applicable codes, laws, and standards.
Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by
suitably trained personnel in accordance with applicable code of practice. If this equipment is used in a manner that is not specified by the
manufacturer, the protection that is provided by the equipment can be impaired.

Summary of Changes

This publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect all changes.
Topic
Reformatted Layout of Publication

Environment and Enclosure Information

ATTENTION: This equipment is intended for use in a Pollution Degree 2 industrial environment, in overvoltage Category II applications
(as defined in IEC 60664-1), at altitudes up to 2000 m (6561 ft) without derating. This equipment is considered Group 1, Class A industrial equipment
according to IEC/EN 61326-1. Without appropriate precautions, there can be potential difficulties with electromagnetic compatibility in other
environments due to conducted as well as radiated disturbance. In addition to this publication, see the following:
• Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1, for more installation requirements
• UL 50, CSA C22.2 No. 94.1, and IEC 60529, as applicable, for explanations of the degrees of protection provided by enclosures

UL/cUL Mark Compliance

Equipment with the UL/cUL mark complies with the requirements of UL 61010-1, UL 61010-2-201, CSA C22.2 No. 61010-1, and CSA C22.2 No. 61010-2-201.
A copy of the certificate of compliance is available at rok.auto/certifications.
This equipment is not suitable for use in locations where children are likely to be present.
Page
1
1
1
2
2
2
3
3
4
4
6
7
7
For machine mount box PCs using the Windows® operating system (OS):
section about installation, configuration, and operation of this equipment before you install,
Page
Throughout