Yongnuo YN650EX-RF Manual page 8

Nomenclature
3.Recycle Indicator Status
Status
T h e fl a s h i s c h a r g e d a n d
Red Light Lit
ready to flash
F l a s h c h a r g i n g i s n o t
Blue Light Lit
completed
a. The battery power is low,
a n d t h e fl a s h i s g o i n g t o
Blue Light
power off automatically.
Blinking
b. Overheating warning
Red Light
Overheating warning
Blinking
Red and Blue
Overheat protection flash
Light Blinking
limit is activated
Alternately
4 . L I N K I n d i c a t o r S t a t u s
Description
Status
Blue Transmission OK
S e n d i n g o r r e c e i v i n g
Red
triggering instruction
6.Sound Prompt Description
Sound
Power on; sound prompt on; flash OK
DiDi
DiDiDi-DiDiDi The flash exposure may be excessive.
Di Di Di The flash exposure may be insufficient.
Di--DiDi DiDi The flash isn' t fully charged.
Di—Di lasts for The flash has been fully charged and is
seconds ready for shooting.
Di-continuousl The battery power is low, and the flash is
y and quickly going to power off automatically.
Sleep mode is activated, and the flash is
Di-Di-Di-
going to power off automatically.
Description
Description
Description
Normal
Wait until flash is fully charged
a. Please change the battery.
b. Reduce the flash frequency or
stop shooting until the flash is
cooled down.
Reduce the flash frequency or
stop shooting until the flash is
cooled down.
Stop shooting or turn off the
flash until it is cooled down.
5.Slave Unit Recycle Indicator
Description
Status
Flash recycle of the slave
Blinking
unit completed.
Flash recycle of the slave
Off
unit is not completed.
Normal
A d j u s t e x p o s u r e
s e t t i n g s o r c h a n g e
shooting conditions.
A d j u s t e x p o s u r e
s e t t i n g s o r c h a n g e
shooting conditions.
Wait until flash is fully
charged.
Normal
P l e a s e c h a n g e t h e
battery.
Please turn off the flash
and turn it on again.
8
Action
Description
Action