Table of Contents
Advertisement
protection mechanism: the <
and the <Recycle Indicator> will blink in red and blue alternately. After
the overheat protection mechanism is activated, the flash will be locked,
the parameters cannot be adjusted and the flash cannot fire. At this
time, please leave the flash idle for 10 minutes and wait until it is cooled
down. To avoid affecting the normal shooting, when fast shot is needed,
please try to keep the flash output under 1/4.
When an overheating warning appears, please reduce the flash
frequency or flash output appropriately.
When removing the battery after multiple firings in succession, please be
careful that the battery may be very hot.
12.Sound Prompt
The sound prompt can be turned on or off through the custom function
setting option C.Fn 06. After the sound prompt is on, the flash will emit
different sounds to indicate its working status. For more details, please
refer to the "Nomenclature" section.
13.Off-camera Status Indicator
The off-camera status indicator can be turned
on or off through the custom function setting
option C.Fn 08. With this function activated,
the indicator will blink after slave unit
completes the flash charging recycle, which is
convenient for you to learn the recycle status
of the off-camera flash in real time from a
distance.
14.Autosave
When the flash is turned off by pressing [Power Switch], the flash will
automatically save the current settings, which is convenient for you to
use this flash next time.
15.PC Sync Port (input)
YN685 is equipped with standard PC sync port. Through connecting to
the PC sync port, this speed-lite can be triggered synchronously.
16.Clearing Flash Settings
Press the function button 2 and 3 for about 2 seconds, the flash settings,
> icon will be displayed on the LCD panel
13
Basic Functions
Hide quick links:
Advertisement
Table of Contents
