Cleaning Hard Floors; Cleaning Carpets; Turning Off Your Steam Mop - Dirt Devil SM10 User Manual

Swivel head steam mop

Table of Contents

USING YOUR STEAM MOP

WARNING: Danger of scalding

CLEANING HARD FLOORS

Your steam mop is designed to clean hard floors such as ceramic, tile, vinyl, laminate, marble, stone and

sealed hardwood floors. Use of your steam mop on waxed or some unwaxed floors may result in diminished

glossiness. Test the steam mop in an inconspicuous area and check the care instructions from your flooring

manufacturer before use.

1. Plug the unit in and wait 30 seconds for it to heat up.

2. Choose the level of steam to clean your floor. The lowest steam level is ideal for delicate floors, the

medium level is best suited to regular cleaning and the highest steam level allows you to clean durable floors

or sticky messes.

3. Begin cleaning by slowly passing the unit over the floor surface.

The carpet glider accessory attaches to the steam mop to allow it to slide over the carpet and clean it.

Please make sure that the carpet gilder has been securely buckled onto the floor head. If it is not in the

correct position, the carpet glider will fall off during cleaning.

NOTE: Move the steam mop in a continuous motion until you are finished. DO NOT leave the mop in a

stationary position

To turn off the steam mop, continue to press the steam control button until the blue light above it is

illuminated.

DIRTDEVIL.CO.UK

Table of Contents