Filling The Water Tank - Dirt Devil SM10 User Manual

USING YOUR STEAM MOP
WARNING: Danger of scalding

FILLING THE WATER TANK

The removable water tank is located at the bottom of the main body. Filtered water is recommended in place
of tap water. To fill your steam mop:
1. Ensure the steam mop is
turned off.
4. Fill the water tank with the
water cup. For best results, water
should be at room temperature.
When the steam mop stops emitting steam, unplug the unit. Simply remove the water tank, refill and
continue steaming.
NOTE: Upon first use of the steam mop or first use after refilling the water tank, the pump may make a
"knocking" sound. This is normal and should only last a few seconds.
8 DIRTDEVIL.CO.UK
Off.
2. Press the buttons on both sides
of the water tank and pull it out.
5. Replace the water tank and
gently slide it into place.
3. Pull out the rubber plug on the
back of the tank.