Connects2 CAM-65 User Manual
  1. Manuals
  2. Brands
  3. Connects2 Manuals
  4. Digital Camera
  5. CAM-65
  6. User manual

Connects2 CAM-65 User Manual

Universal brake light reverse camera with wired brake light application
Hide thumbs
1
2

Advertisement

Table of Contents

U s e r M a n u a l
CAM-65

PRODUCT FEATURES:

Image Sensor: 1/3 CMOS
TV Lines: 600
Resolution: 756 x 504
Minimum Illumination: 0.1 Lux
TV System: NTSC
Waterproof Rating: IP68
Horizontal Angle: 80 Degrees
Vertical Angle: 145 Degrees
Diagonal Angle: 170 Degrees
Parking Lines: Yes (Removable)
Enhanced Performance In Low Light: Yes
Video Output: 1.0V p-p 75ohm
Operating Voltage 12V DC (Negative Ground)
Current Consumption: 120mA @ 13.8V
Operating Temperature: -20 Degrees C to +70 Degrees C
DISCLAIMER:
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
www.c2vision-eu.com
Universal Brake Light Reverse Camera
with wired brake light application

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAM-65 and is the answer not in the manual?

Questions and answers

Related Manuals for Connects2 CAM-65

Summary of Contents for Connects2 CAM-65

  • Page 1 Connects2 can not be held responsible for the installation of this product. Technical Support Connects2 want to provide a fast and suitable resolution should you encounter any technical issues. With this in mind, when contacting Connects2, try to provide as much Information as possible.
  • Page 2 11. The camera will be default with parking guidelines. To remove this, simply cut the green wire found on the camera’s connector. For further help and support, please contact us directly at support.connects2.com/tickets/technical and fill out a support ticket with the full details of your issue. www.c2vision-eu.com...

Table of Contents