Advertisement
Table of Contents
U s e r M a n u a l
CAM-PE2.2
PRODUCT FEATURES:
Image Sensor: 1/3" CMOS
TV Lines: 700
Resolution: 500 x 582 (PAL) 510 x 492 (NTSC)
Minimum Illumination: 0 Lux
TV System: PAL/NTSC (Switchable)
Waterproof Rating: IP69K
Viewing Angle: 170 Degree
Automatic Back Light Compensation
Mirror Image Available
Operating Voltage: 12V DC (Negative Ground)
Current Consumption: 37mA @ 13.8V
Operating Temperature: -30 Degrees C to +70 Degrees C
DISCLAIMER:
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
www.c2vision-eu.com
High Level Brake Light Reverse Camera
Peugeot Expert, Expert Combi, Traveller 2016>
Advertisement
Table of Contents
Related Manuals for Connects2 CAM-PE2.2
Summary of Contents for Connects2 CAM-PE2.2
- Page 1 Connects2 can not be held responsible for the installation of this product. Technical Support Connects2 want to provide a fast and suitable resolution should you encounter any technical issues. With this in mind, when contacting Connects2, try to provide as much Information as possible.
- Page 2 When a connection between posts is made = NTSC Please note: power to the camera needs to be disconnected in order for TV system switch to take place. NTSC Subscribe to our YouTube Channel for installation guides and tips... www.youtube.com/connects2 www.c2vision-eu.com...
Need help?
Do you have a question about the CAM-PE2.2 and is the answer not in the manual?
Questions and answers