Battery; Bypass Protected Areas; Change Date And Time; Chimes And Beeps - ADT 2 Gig Go! Control Quick Manual

2 Gig Go! Control Quick Guide
To disarm, press [DISARM] on the Security Screen or the Menu Sreen, and enter a valid [security
code].
For more information on this topic please visit the complete

Battery

The 2 Gig Go! Control operates on a 7.2V battery.
For instructions on replacing your battery, please visit our

Bypass Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
Press [ARM] from the Security or Menu Screen.
Press [BYPASS ALL] to force bypass the open sensors (including any open interior sensors).
Enter your [security code] (unless the installer has set Quick Bypass) to activate the bypass and
continue to the Arming Screen.
For more information on this topic please visit the complete

Change Date and Time

To access date and time settings:
From the Home Screen, press [SECURITY].
From the Security Screen, press [MENU].
From the Menu Screen, press [TOOLBOX].
From the second Toolbox Screen (2 of 3), press [SET DATE or SET TIME].
Use up and down arrows to set the current date or time. Press [OK].
A confirmation screen showing the date and time set appears. Press [OK].
For more information on this topic please visit the complete

Chimes and Beeps

Your system communicates events using chimes and beeps whenever a protected door or window is
opened.
To silence or enable chimes, select the [STATUS & SETTINGS] button from the home screen.
Scroll down until you reach the [Chime] button.
Touching the button toggles between Chime On and Chime Off.
http://alpha.adt.com/help/280[11/14/2018 8:14:39 PM]
2 Gig Go!Control manual.
Battery Replacement Page.
2 Gig Go!Control manual.
2 Gig Go!Control manual.