Advertisement
CAUTION
• Turn off the air conditioner and disconnect the power if you are not going to use
it for a long time.
• Make sure that water condensation can drain unhindered from the unit.
• Do not operate the air conditioner with wet hands. This may cause electric shock.
• Do not use device for any other purpose than its intended use.
• Do not climb onto or place objects on top of the outdoor unit.
• As with any mechanical equipment, contact with sharp sheet metal edges can
result in personal injury. Take care while handling this equipment and wear
gloves and protective clothing.
ELECTRICAL WARNINGS
• The product must be properly grounded at the time of installation, or electrical
shock may occur.
• For all electrical work, follow all local and national wiring standards, regulations,
and the Installation Manual. Connect cables tightly, and clamp them securely
to prevent external forces from damaging the terminal. Improper electrical
connections can overheat and cause fire, and may also cause shock. All electrical
connections must be made according to the Electrical Connection Diagram
located on the panels of the indoor and outdoor units.
• All wiring must be properly arranged to ensure that the control board cover can
close properly. If the control board cover is not closed properly, it can lead to
corrosion and cause the connection points on the terminal to heat up, catch fire,
or cause electrical shock.
TAKE NOTE OF FUSE SPECIFICATIONS
• The air conditioner's circuit board (PCB) may be designed with a fuse to provide
overcurrent protection.
• The specifications of the fuse, if equipped, are printed on the circuit board,
examples of such are T5A/250VAC and T10A/250VAC.
Page 4
Advertisement
