Advertisement
4. Unplug temperature sensors T1, T2,
T2A, T2B and electronic expansion
valve (EEV) from the control board.
T1: Room temperature sensor
T2: Evaporator central sensor plug
T2A: Evaporator intput sensor plug
T2B: Evaporator output sensor plug
NOTICE
T2A and T2B are only available for
some models.
5. Remove T1, T2, T2A, T2B, EEV sensor
wire ties.
6. Take out the evaporator and drain
pan and rotate 180°.
T2
T2A&T2B
T1
7. Adjust the position of the mounting
parts.
EEV
8. Reinstall the evaporator and drain
pan.
Page 13
Advertisement
