Table of Contents
Advertisement
IMPORTANT
When installing the appliance, make sure the electrical connection is carried out in compliance with that specified on the
data plate.
B.3
Gas appliance
Models
+9IIKAAOMIA
+9IIMAAOMIA
B.4
Electrical appliance Technical data
Type Code
+9IIKDAOMIA
EFT93
+9IIMDAOMIA
1.
minimum recommended
C
GENERAL INFORMATION
WARNING
Refer to "Safety Information".
C.1
Introduction
Given below is some information regarding the intended use of
this appliance, its testing, and a description of the symbols
used (that identifies the type of warning), the definitions of
terms used in the manual and useful information for the
appliance user.
C.2
Intended use and restrictions
This appliance is designed for cooking food. It is intended for
commercial use.
This appliance must not be used by minors and/or adults
with limited physical, sensory or mental abilities or with-
out adequate experience and knowledge regarding its use.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
CAUTION
The machine is not suitable for installation
outdoors and/or in places exposed to
atmospheric agents (rain, direct sunlight,
etc.).
C.3
Testing and inspection
Our appliances have been designed and optimized, with
laboratory testing, in order to obtain high performance and
efficiency.
Passing of the tests (visual inspection - gas/electrical test -
functional test) is guaranteed and certified by the specific
enclosures.
C.4
Copyright
This manual is intended solely for consultation by the operator
and can only be given to third parties with the permission of
Electrolux Professional SpA.
C.5
Keeping the manual
The manual must be carefully kept for the entire life of the
machine, until scrapping. The manual must stay with the
machine in case of transfer, sale, hire, granting of use or
leasing.
14
ISO 7/1 connec-
tion – SP
connection
Ø
1200mm
1/2"
Power
supply
Models
voltage
V
1200m-
380 – 400
m
Nominal heat output
Max. kW
Min. kW
—
33
Frequency
Phases
Hz
3 / 3+N
50 — 60
C.6
Recipients of the manual
This manual is intended for:
• the carrier and handling personnel;
• installation and commissioning personnel;
• the employer of machine users and the workplace
manager;
• operators for normal machine use;
• specialised personnel - Customer Care service (see service
manual).
C.7
Definitions
Listed below are the definitions of the main terms used in the
manual. It is advisable to read them carefully before use.
Operator
machine installation, adjustment, use,
maintenance, cleaning, repair and trans-
port personnel.
Manufacturer
Electrolux Professional SpA or any other
service centre authorised by Electrolux
Professional SpA.
Operator for
an operator who has been informed and
normal
trained regarding the tasks and hazards
machine use
involved in normal machine use.
Customer
an operator instructed/trained by the
Care service
Manufacturer and who, based on his
or specialised
professional and specific training, experi-
personnel
ence and knowledge of the accident-
prevention regulations, is able to appraise
the operations to be carried out on the
machine and recognise and prevent any
risks. His professionalism covers the
mechanical, electrotechnical and elec-
tronics fields etc.
Danger
source of possible injury or harm to health.
Hazardous
any situation where an operator is
situation
exposed to one or more hazards.
Risk
a combination of probabilities and risks of
injury or harm to health in a hazardous
situation.
Protection
safety measures consisting of the use of
devices
specific technical means (guards and
safety devices) for protecting operators
against risks.
Guard
an element of a machine used in a specific
way to provide protection by means of a
physical barrier.
Type of
construction
mm²
A1
Power
Nominal max.
supply
Power
cable
section
kW
mm²
20
6
1
Advertisement
Table of Contents
