Table of Contents
Advertisement
TOSHIBA
E6580717
General Handling Precautions
Ni\
\Y
DO NOT
DISASSEMBLE
PROHIBITED
A
WARNING
•
Do not disassemble, modify, or repair this equipment.
These actions can result in electrical shock, fire, or
injury.
Contact your sales outlet
for repairs.
•
Do not open the front cover (panel door) while power is being supplied.
Some of the points inside carry high voltage; touching them will result in electric
shock.
•
Do not insert any objects (such as wire fragments, rods, or needles) into this
equipment.
This can lead to electrical shock or fire.
Transportation and Installation
0
MANDATORY
Wiring
0
MANDATORY
BE SURE TO
CONNECT
GROUND
•
A
WARNING
If this equipment is used with the front cover removed, it must be installed in the
distribution panel.
Not installing this unit in the distribution panel can result in electrical shock.
A
WARNING
•
Before making connections, do the following:
(1) Turn off the input power.
(2) Wait at least 10 minutes and check to make sure the charge lamp has gone out.
(3) Use a tester, etc. capable of measuring high DC voltage (800V DC or greater) and
make sure the main circuit voltage (PA-PC) is no more than 45V.
Failure to implement the above procedures before making connections may result in
electric
shock.
•
Make sure a ground line is securely connected to the unit.
Electric shock or fire may occur in case of failure or current leakage if the ground line
is not securely connected.
- I l l -
Advertisement
Table of Contents
