Setting Up The Unit; Positioning And Connecting; The Unit - Weinmann BiLevel ST 22 Operating Instructions Manual

3. Setting up the unit

3.1 Positioning and connecting the unit
Set up the unit on a flat surface, e.g. a bedside cabinet or on the floor next to the
bed. Keep a distance between the wall and the back of the unit of at least 5 cm,
because at the back of the unit there is an air inlet.
Caution!
Do not cover the unit with bedding etc. The air inlet would then be
blocked and the unit could overheat, resulting in insufficient therapy
delivery and damage to the unit.
Cable securing clip
1. Plug the power supply cable into the supply
connection of the BiLevel ST 22. Then plug the
power supply into a socket outlet (using the power
supply cable).
Note
Always secure the mains socket to the power
supply using the cable securing clip to prevent
unintentional removal of the plug.
2. Connect the power supply cable to a mains
socket. The power supply automatically
determines the appropriate mains voltage (150 -
230 V). "Weinmann BiLevel ST 22" appears on
the display.
3. Insert the hose system adapter into the unit outlet.
The unit is now ready to use.
Setting up the unit
15