Table of Contents
Advertisement
PA Series Biofeedback and Stimulation System User Manual
2
Keep the environment clean. Make the device far from corrosive medicine, dust
area, high-temperature and humid environment. Avoid vibration. Do not move it
with the power cord connected.
3
Do not operate the device if it is damp or wet because of condensation or spills.
Avoid using the device immediately after moving it from a cold environment to
a warm, humid location.
4
Keep the workstation at least 5cm away from the wall for the sake of heat and
air dissipation.
5
Do not sterilize the device or any accessory with autoclave or gas.
6
This system is medical equipment. Unauthorized third party software is
forbidden to be installed on it.
7
Do not delete the system files. That's to avoid improper system running.
8
Do not change the time of the system unless necessary, otherwise the
appointment data may be lost.
9
The waste adhesive electrodes should be treated as medical waste.
10 The waste vagina sensor and rectum sensor should be treated as medical
waste.
11 The device and accessories are to be disposed of according to local
regulations after their useful lives. Alternatively, they can be returned to the
dealer or the manufacturer for recycling or proper disposal.
12 Please install protection software and update the virus database when internet
is connected.
13 When turning on Bluetooth and connecting to a Bluetooth audio device, please
do not connect to unfamiliar devices.
14 Please do not root the system.
15 Please enable the firewall and add the software installed in the device to the
whitelist.
16 Please do not install other software after the device leaves the factory.
17 For secure deployment, please use wired network in case of unstable
bandwidth and network led by Wi-Fi or unstable network device, and cause
data transmission problem.
9
Safety Guidance
Advertisement
Table of Contents
