Battery; Charger; Motor; Display - Magnum Peak T5 Manual

Overview

3.1 Battery

The charger can become hot during charging. Avoid direct contact with the battery and charger during charging
operation.
Failure to use a Magnum Bikes authorized charger may damage your battery in addition to voiding the warranty.
• When the battery has reached the end of its service life, it should be treated as hazardous waste material. It should
not be disposed of in regular household trash. Ask your dealer for advice or consult your local laws for proper
disposal of the battery.
• Not all batteries are compatible with all bikes. Check with a Magnum dealer or with Magnum Bikes customer support
for questions about compatibility.
• Charging at temperatures below 32°F (0°C) or above 122°F (50°C) can cause the battery to charge insufficiently and
can be harmful to the life of the battery.
If the battery is to be unused for a period longer than a month, the battery should be charged up to 80% every 30
days. Neglecting to do so will either shorten the life-cycle of the battery or cause the battery to no longer function.

3.2 Charger

Your Magnum Peak T5/T7 battery should be charged with the supplied Magnum Battery Charger. Contact
Magnum Bikes customer support (323-375-2666, info@magnumbikes.com) or your local Magnum Dealer for the
correct charger.
• It is important that the correct and recommended charger be used for your battery. Failure to use the correct charger
for your battery may result in your battery overheating, failing, or possibly exploding.
• Do not use your charger if it is damaged, non-functional, or performing abnormally. Using a damaged charger can
damage the battery, and possibly lead to a fire hazard.
• Do not use your charger if it has experienced a significant impact from a fall or crash, even if there are no obvious or
apparent signs of damage or wear.
• Do not use your charger if it becomes too hot to touch, is emitting an odd odor, or is showing signs of overheating.
Disconnect the charger from the power source and the battery. Move the battery and charger to a safe location.
09
Always ensure that the charger connectors are properly aligned with the battery's charging ports before connecting.
Technical specifications and other details can be found on the printed label on the charger.

3.3 Motor

The Peak T5/T7 Bafang motor works in conjunction with the e-bike's PAS, controller, and rider to provide power
assistance to the user. The motor is designed to offer assistance as the the rider pedals and for short periods
while the throttle is engaged. Extended throttle-only use can lead to excessive wear and tear on your bike.

3.4 Display

Walk Assist Indicator
Service Tool Connection
Error Code
Speed (MPH | KM/H) Bluetooth
Battery Level Indicator Light Indicator
Power Output
PAS Levels
Trip Information & Indicators
Display Control
The display control will allow you to change the level of pedal assist, toggle through the display's readouts, turn
the e-bike's lights on and off, and activate/deactivate walk mode.
Pressing the "Adjust Up" button will increase the pedal assist level. Pressing the "Adjust Down" button will de-
crease the pedal assist level.
To toggle through display functions, press the mode function button on the display control. This will toggle
through Trip/Average, Odometer/Max.
Press and hold the "Adjust Up" button to activate the e-bike's integrated lights. The light icon on the display screen
will show that the light system has been activated.
Press and hold the "Adjust Down" button to activate Walk-Mode, (speed must be below 3mph to activate). The
display will show a "Walk-Mode" symbol upon activation. Release the "Adjust Down" to exit Walk-Mode.
Overview
10