Table of Contents
Advertisement
Quick Links
COSEC COGNIFACE EBS200
Quick Installation Guide
Contents
Please read this guide first for correct installation and retain it for future reference. The
information in this guide has been authenticated at the time of publication. However,
Matrix Comsec reserves the right to make changes in product design and specifications
without prior notice.
Copyright
All rights reserved. No part of this document may be copied or reproduced in any form
or by any means without the prior written consent of Matrix Comsec.
Warranty
Limited Warranty. Valid only if primary protection is provided, mains supply is within
limit and protected, and environment conditions are maintained within product
specifications. Complete warranty statement is available on our website:
www.matrixaccesscontrol.com
3
5
6
7
8
2
Advertisement
Table of Contents
Related Manuals for Matrix COSEC COGNIFACE EBS200
Summary of Contents for Matrix COSEC COGNIFACE EBS200
- Page 1 Please read this guide first for correct installation and retain it for future reference. The information in this guide has been authenticated at the time of publication. However, Matrix Comsec reserves the right to make changes in product design and specifications without prior notice.
- Page 2 COGNIFACE EBS200 is an Embedded Server which stores User Face • Templates and works as a Local Identification Server(IDS). COSEC Device captures video streaming from MATRIX IP Camera • using MJPEG profile and sends images to COGNIFACE EBS200. COGNIFACE EBS200 will process those images and detect faces.
- Page 3 Prerequisites for Installation What your Package Contains Before installing COSEC COGNIFACE EBS200, below is the list of Devices 1) COSEC COGNIFACE EBS200 with Memory Card required to set up COSEC COGNIFACE EBS200 for Face Detecteion. IP Camera: Matrix Dome Camera or Matrix Bullet Camera for live video streaming.
- Page 4 Installing COSEC COGNIFACE EBS200 Configuration Settings 1) IP Camera Settings Follow the steps given below to install your COSEC COGNIFACE EBS200 for appropriate face detection. Default Camera IP Address is 192.168.1.126. Connect all three devices to the same Network Switch for inter •...
- Page 5 In Server Port enter 12000 (Default Port). • Under Face Recognition, enter the following URL in the IP Camera • MJPEG URL text-box in the format as shown below. http://IP_OF_CAMERA/matrix-cgi/mjpeg?profile-no=4 Enter the User Name and Password of the IP Camera. •...
- Page 6 You can set the value of the parameters as per your • requirement. Follow the below steps to reset COSEC COGNIFACE EBS200, Create a blank notepad file with name ‘reset.txt’. • Copy the created notepad file(reset.txt) to the USB drive.
- Page 7 If you are unable to dispose-off the products or unable to locate e-waste recyclers, you may return the products to Matrix Return Material Authorization (RMA) department. Compliance MATRIX COMSEC Head Office...
Need help?
Do you have a question about the COSEC COGNIFACE EBS200 and is the answer not in the manual?
Questions and answers