Advertisement
Quick Links
Part #825-076 (S/M) and 825-077 (L/XL)
MOD-1 Hood Assembly w/Bib L/XL 7 mm Kit
PART NUMBER
330-105
530-052
805-076 or 805-077
830-047
840-010
Tools Required:
• Flathead Screwdriver
© MMXXII Kirby Morgan Dive Systems, Inc. All Rights Reserved
Kirby Morgan Dive Systems, Inc.
www.KirbyMorgan.com email: kmdsi@KirbyMorgan.com
Installation Guide
DESCRIPTION
Nut (Pre-installed to secure bracket to hood)
Screw
7 mm Mod-1 Hood w/Bib S/M or 7 mm Mod-1 Hood w/
Bib L/XL
Screw (Pre-installed to secure bracket to hood)
Hood Frame Bracket
FRAME
EAR
POCKET
PULL TAB
1430 Jason Way Santa Maria, California 93455
Phone: 805/928-7772
HOOD
Document #220323001
Fax: 805/928-0342
QTY
4
4
1
4
4
BRACKET
OUTER SEAL
Page 1 of 8
®
Advertisement
Related Manuals for Kirby Morgan MOD-1
Summary of Contents for Kirby Morgan MOD-1
- Page 1 PART NUMBER DESCRIPTION 330-105 Nut (Pre-installed to secure bracket to hood) 530-052 Screw 7 mm Mod-1 Hood w/Bib S/M or 7 mm Mod-1 Hood w/ 805-076 or 805-077 Bib L/XL 830-047 Screw (Pre-installed to secure bracket to hood) 840-010 Hood Frame Bracket Tools Required: •...
-
Page 2: Assembly Procedures
The hood can be installed with the mask strap on the mask. 1. Bring the hood assembly to the mask, as shown in the picture. 2. Align tabs to mask and insert screws. © MMXXII Kirby Morgan Dive Systems, Inc. All Rights Reserved Document #220323001 Page 2 of 8... - Page 3 4. Stretch the pull tab away from the mask and over the apex of the lower jaw frame. Use the nylon pocket to capture the apex of the jaw frame. © MMXXII Kirby Morgan Dive Systems, Inc. All Rights Reserved Document #220323001...
- Page 4 5. Ensure the leading edge of the outer seal is clear of the mask skirt. The mask skirt should touch the diver’s face first and the hood outer seal will surround the face where the mask skirt stops. © MMXXII Kirby Morgan Dive Systems, Inc. All Rights Reserved Document #220323001...
- Page 5 Post Dive Depending on water conditions, the MOD-1 hood can be left in place when performing post dive cleaning and inspection. When doing multiple dives for multiple days, it is recommended that the hood be removed and inspected at least every seven days.
- Page 6 This page intentionally left blank...
- Page 7 This page intentionally left blank...
- Page 8 Kirby Morgan Dive Systems, Inc. 1430 Jason Way Santa Maria, CA 93455, USA Telephone (805) 928-7772, FAX (805) 928-0342 E-Mail: KMDSI@KirbyMorgan.com, Web Site:www.KirbyMorgan.com...