Back - GE Dash 3000 Operator's Manual

Equipment Overview

Back

2-4
1
2
3
1 Line voltage selector
2 Product code label
3 Equipotential stud
4 DC power connector
5 Wireless transmitter
label
6 Ethernet connector
7 Aux connector
8 Defib Sync
connector
Dash™ 3000/4000/5000
3000
5
4 6 7
Matches the line voltage and frequency rating for your
country.
Identifies the product code for this monitor for identification
and service needs.
Provides a common reference to an auxiliary device via a
ground wire attached to the stud.
Provides connection for DC power cable. The internal power
supply converts the AC current to DC power.
The monitor is preset at the factory for a specific AC voltage.
Refer to the label on the back of the unit for the voltage and
current requirements. Before applying power, verify the
power requirements match your power supply.
Identifies monitors that contain an internal wireless
transmitter for network communication.
Provides network connections to other monitors and devices
used in the patient monitoring network.
Provides serial connection to compatible auxiliary devices,
including:
Remote control
TRAM-RAC housing
Remote display
®
Nellcor 395 pulse oximeter
®
Aspect BISx module
Provides analog output signals to other equipment. For
more information, refer to Analog Output on page
10
9
8
8-6.
2000966-386D