GE Dash 3000 Operator's Manual page 249

Duplicate Parameters
SAM Module
Yes
Yes
Yes
Yes
No
No
No
2000966-386D
One transcutaneous monitor.
One urometer.
One continuous cardiac output monitor.
One multi-parameter monitor.
Two pulse oximeters.
One auto-association device (GE monitor).
The connectivity device can support a pre-defined number of parameters. When the
maximum number is exceeded, the connectivity device ignores all data from the
duplicate parameter.
Two SpO
2
Four temperature parameters.
Eight BP parameters.
Eight IV parameters.
One CO or Gas parameter.
2
One each of all other parameters
CO and Gas Parameter Handling
2
The connectivity device requires that CO
same peripheral device. If a device only provides one of the parameters, the
connectivity device does not recognize the other parameter from any other peripheral
device.
However, when the connectivity device is connected to a Dash 3000/4000/5000
monitor, the monitor controls which source of CO
The monitor does NOT require that CO
peripheral device.
Refer to the following table for more information CO
Monitor CO Option
2
No
Yes
No
Yes
Yes
Yes
No
Dash™ 3000/4000/5000
parameters.
and Gas parameters originate from the same
2
CO
Unity Network ID
No
No
Yes
Yes
No
Yes
Yes Unity Network ID
Interfacing with Non-GE Devices
and Gas parameters originate from the
2
and Gas parameter data is used.
2
and Gas parameter data.
2
Data Source
Gas Data Source
2
SAM module SAM module
SAM module SAM module
SAM module SAM module
SAM module SAM module
Monitor
Monitor Unity Network ID
Unity Network ID
None
E-13