Installation Guidelines - GE Dash 3000 Operator's Manual

Maintenance
Battery Charger
Battery Status Menu

Installation Guidelines

A-10
When you select the Target Capacity switch on the charger, the charger compares
the battery's performance to a 60, 70, or 80 percent target capacity set on the battery
charger. If the battery fails to meet the target performance, the battery charger will
prompt you to condition the battery. If after the condition cycle has been completed,
the battery does NOT meet the target performance, then the battery charger will
illuminate a "fail" light.
To display the BATTERY STATUS menu, select MORE MENUS > BATTERY
STATUS.
Select BATTERY HELP for more information on batteries.
SLOT STATUS — Definitions of the information presented in the BATTERY
STATUS information window.
TIMES — Definitions of the information presented in the BATTERY STATUS
information window.
FUEL GAUGES — Explains the battery capacity gauges.
ALARMS — Lists the battery messages and solutions.
Position the monitor in a location that does not artificially increase the operating
temperature of the battery.
To optimize battery life and performance, select a location that does NOT
artificially increase the ambient temperature surrounding the monitor.
Do not place the monitor near a heat vent or near heat-generating equipment,
such as computer monitors.
Dash™ 3000/4000/5000
637B
2000966-386D