Advertisement
Technical Data
Auxiliary switches
Feedback
Fail safe - Enerdrive
Power consumption
Control signal
Power supply
Running time through 90º
Torque
Electrical connection
Inlet bushing
Angle of rotation
Direction of rotation
Ambient temperature
Storage temperature
Relative Humidity
Ingress protection
Weight
Warning: Do not press the clutch when actuator is powered
Dimensions
Caution
We strongly recommend that all Neptronic
prevent interference with, and/or possible damage to incompatible equipment.
When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
1
Enerdrive System U.S.A. Patent #5,278,454
STS-210804
Feature:
• Mounts easy on round
& square shaft (with option –8).
• External clutch for manual adjustments.
• Maintenance free.
• Position indicator.
• Fail safe by Enerdrive System
(on model 60, 65 & 80).
• Auxiliary switches
(on model 20 & 80).
ST000S
ST005S
No
No
No
Yes
No
8 VA
3 wire / 2 position, 3 wire / 3 point floating
0 to 90 degrees, mechanically adjustable (factory set with 90º stroke)
Reversible, Clockwise (CW) or Counterclockwise (CCW) (factory set with CW direction)
IP54 equivalent to Nema type 3R if water tight inlet bushings (not supplied NEP617) are installed
®
products be wired to a separate transformer and that transformer shall service only Neptronic
Specification and Installation Instructions
1
ST020S
ST060S
Yes (2)
No
No
No
2 wire / 2 position, 4 wire / 3 point floating
22 to 26 VAC or 28 to 32 VDC
90 - 110 sec. (Fail-safe 20-35 sec)
70 in.lb. [8 Nm] at rated voltage
2
18 AWG [0.8 mm
] minimum
2 inlet bushings: 13/16" [20.6mm]
-22ºF to +122ºF [-30ºC to +50ºC]
-22ºF to +122ºF [-30ºC to +50ºC]
5 to 95 % non condensing.
IP22 equivalent to Nema type 2,
3 lbs. [1.4 kg]
Dimension
A
B
C
D
Actuator
ST000S
ST005S
ST020S
ST060S
ST065S
ST080S
ST065S
ST080S
No
Yes (2)
Yes
Yes
20VA Max, 8VA
Inches
Metric (mm)
1.50
38.1
3.64
92.5
6.60
167.5
3.02
76.8
®
products. This precaution will
No
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Neptronic ST000S
Summary of Contents for Neptronic ST000S
- Page 1 ® ® We strongly recommend that all Neptronic products be wired to a separate transformer and that transformer shall service only Neptronic products. This precaution will prevent interference with, and/or possible damage to incompatible equipment. When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
- Page 2 Fix the bracket to the ductwork with #8 self-tapping screws. Wiring Diagrams Models ST000S, 005S, 020S Models ST060S, 065S, 080S 3 wire / 2 position 2 wire / 2 position...
Need help?
Do you have a question about the ST000S and is the answer not in the manual?
Questions and answers