Changing A Bulb - Ford FOCUS LV Manual

3. Disconnect the electrical
connectors.
4. Remove the rear lamp.

CHANGING A BULB

WARNINGS
Switch the lights and the ignition
off.
Let the bulb cool down before
removing it.
We recommend that you ask your
Ford dealer to change the bulbs
if your vehicle is fitted with Xenon
headlamps. There is a risk of injury due to
high voltage.
CAUTIONS
Do not touch the glass of the bulb.
Only fit bulbs of the correct
specification. See Bulb
specification chart (page 46).
Note: You will need to remove the
headlamp to change the headlamp, side
lamp or front direction indicator bulbs.
See Removing a headlamp (page
39).
Note: You will need to remove the rear
lamp to change the brake lamp, tail lamp
or rear direction indicator bulbs. See
Removing a rear lamp (page 39).
Note: The following instructions
describe how to remove the bulbs. Fit
replacements in the reverse order unless
otherwise stated.
Lighting
Headlamp dipped beam
1. Remove the headlamp. See
Removing a headlamp (page
39).
2
E97738
2. Remove the cover.
3. Disconnect the electrical connector.
4. Remove the bulb.
Headlamp main beam
1. Remove the headlamp. See
Removing a headlamp (page
39).
2
E97739
2. Remove the cover.
-40-
3
4
3
4